If the honeycomb board has good strength and stiffness and flatness, then the corrugated board is a good large-shape curved plate material. The surface is 1.0-1.2mm aluminum plate, and the back is corrugated steel or aluminum material. This type of plate can meet the special design requirements of designers, and is widely used in theaters, exhibition halls and other insufficient places.
Uses: building curtain wall decoration, old building exterior wall transformation. Interior decoration, partition, ceiling, display board, signage, advertising board, store decoration.

Substrate material:
The base material of aluminum corrugated board is 3003 alloy aluminum.
Aluminum surface coating: KNTR500 fluorocarbon resin coating produced by Akzo, one of the best paint suppliers. It can effectively resist acid rain, air pollution and ultraviolet light erosion, with long use time, strong adsorption capacity, good gloss, aging resistance, no color characteristics.

Adhesive agent:
The company uses raw material epoxy resin adhesive to make the bonding strength and uniform composite between aluminum plates. The peeling strength of the drum exceeds 80N.cm/cm.

Features:
The surface is flat, and the panel is not easy to deform. Surface fluorocarbon roller coating, uniform finish, easy to clean. Rich color (imitation stone, imitation wood grain color). Light weight, high stripping strength, good weather resistance. Sound insulation, heat insulation performance is good. Fire rating: Class A

Standard specifications:
Thickness :6mm, 8mm
Conventional plate width :1020mm, 1250mm, 1550mm
Conventional plate length :2440mm
According to customer requirements, the length can be arbitrarily set within 6000mm.
Packing: Wooden frame packing or wooden case

Service performance
The heat-hardening resin used is a heat-bonded resin, so it has a metal adhesion, high adhesion and impact resistance, high shock resistance, high strength, electrical insulation, moisture resistance, drug resistance, corrosion resistance
Low compression: there are no saprophytes in reaction hardening so the shrinkage rate is low
Low pressure hardening: the bonding pressure is also sufficient
 

● High strength: the plate has the characteristics of high strength, good hardness and high stiffness; In particular, the characteristics of high stiffness, the traditional aluminum veneer can not be compared with it, than the honeycomb flatness sound is not easy to produce middle drum phenomenon.
●High flatness and strong compression resistance: the water-corrugated core structure of the plate seal, like many small I-beams, can disperse the pressure of the panel, make the plate stressed evenly, make it withstand the pressure strength and maintain a high flatness when the panel is in a large area, and can achieve a good application of large size.
●Heat preservation and insulation: Because the air layer in the middle of the plate is divided into a number of sealed unit rooms by the panel, the bottom plate and the water corrugated core, there is no convection between the air, which is not conducive to the conduction in the heat, so that the plate has good insulation and sound insulation characteristics.
●No color difference, no discoloration: the surface of the plate adopts the pre-roll coating process, the coating surface is no color difference, durable no discoloration, low and uniform luster is not easy to reflect.
●Moisture-proof and anti-corrosion: the plate does not absorb water, has moisture-proof, no mildew, decay and other conditions in a humid environment.
●Self-cleaning: nano-fluorocarbon coating is used on the surface, which has self-cleaning function without aging and discoloration, and can be cleaned repeatedly.
●Processing, construction is simple: the plate is easy to do a variety of processing, can be cut, punch, bend, can be made into shaped plate, arc plate.